NEWS

After the development of distal femoral and proximal tibial prostheses, the company further cooperated with Xijing Hospital to complete the design and preparation of proximal femoral prostheses, which is an important addition to the family of limb segmentary prostheses, which is of great significanc

Xiao Jialin and Zhang Xiangsong from the Logistics Department prepare vanadium powder this week. About 7800g powder was obtained from 10 vanadium rods, with a total yield of over 80%. After sifting and sealing. Among them, the vanadium powder with small particle size is about 200g, the vanadium powd

On August 28, 2002, Guangzhou Sailong Additive Manufacturing Co., LTD. (hereinafter referred to as "Sailong Additive") was invited to attend the 9th digital orthopedic new technology learning class. Zheng Xiaochuan, deputy director of the Production Technology Department of Sailong Additive, on beha

The Logistics Support Department this week carried out the preparation of hafnium powder, a total of 2 hafnium rods, a total of 1.77kg, the preparation of hafnium powder 1.16kg, after screening and storage. Among them, the particle size of 50-150μm has 1.1kg, the yield of 65.54%, the particle size o

Last week, the production technology department of Guangzhou sailong polished the tantalum irregular parts. The size of this part is about 18mm long, 16mm wide and 1.8mm thick Mobius ring shape jewelry pieces. The polishing technology requirements are relatively high when the surface reaches the bri

Guangzhou Sailong cooperated with the First Affiliated Hospital of Army Medical University.The surgery was performed by Professor Chen Guangxing, Deputy director of the Department of Joint Surgery, and Professor Wang Fuyou led the 3D model design. The personalized DDH acetabular tantalum pad was pre

The production Technology department completed the printing of the thin-wall sample this week, and the thickness of the model is 0.4mm.The printing model was modified according to the customer's processing requirements, the printing accuracy of SEBM equipment and the technical accumulation of printi

On August 26, 2022, The Production Technology Department completed the printing and delivery of iliac wing prosthesis of titanium alloy medical parts for a medical device company.