 |
| Grade : | |
|---|---|
| Packaging : | |
| Materials: | |
| Type : | |
| Quantity: | |
MFF0063
What is the porous metal film filter?
The metal film filter material is composed of the porous metal matrix and porous metal film. The porous metal matrix is sintered by metal powder or wire mesh and the porous metal film is a dense metal powder layer. The porous metal substrate provided product strength and porous metal film provides filtration accuracy.
Features
1. Efficient and accurate filtration: the special structure of the filter disc filtration technology, accurate and sensitive performance, to ensure that only particles smaller than the required size can enter the system, is the most effective filtration system; Specifications are 5μ, 10μ, 20μ, 55μ, 100μ, 130μ, 200μand so on. Users can choose different precision filter disks according to water requirements. System traffic can be flexibly adjusted as required.
2. Standard modular, save space: The system is based on the standard disc filter unit, according to the modular design, users can choose according to demand, flexible, strong interchangeability. The system is compact, occupies a small area, can flexibly use the corner space for installation, such as the treatment of water 300m3/h about the equipment covers an area of only about 6m2(general water quality, filtration grade 100μm).
3. Automatic operation, continuous water discharge: between the units in the filter combination, the backwashing process takes turns, automatic switch between the working and backwashing state, can ensure continuous water discharge; Backwash water consumption is very little, only accounting for 0.5% of the water output; If combined with air auxiliary backwash, the water consumption can be reduced to less than 0.2%. High-speed and thorough backwash, only tens of seconds to complete
4. Long life: the new plastic filter element is strong, no wear, no corrosion, very little scaling, after years of industrial practical verification, the use of 6 to 10 years without wear, not aging, filtering and backwashing effect will not be worse because of the use of time.
5. High quality, less maintenance: the products meet the corresponding quality standards, all products are tested and tested before leaving the factory under simulated conditions, no special tools, few parts; Easy to use, requiring only regular inspection and almost no routine maintenance.
Specifications
| Filter media | Stainless steel; Titanium and titanium alloy; Nickel and nickel alloy |
| Connector | Flat, insert type thread type, fin, or customized |
| Length | 5~1500 mm, or customized |
| Shape | Tube, piece, boat, or customized |
| Diameter | Φ5~300 mm, or customized |
| Pore size | 0.5~30 um |
| Porosity | 10%~30% |
| Permeability | 10~500m3/(m2·kpa·h) |
| Temperature resistance | <=850ºC |
| Maximum working pressure | 3 Mpa |
Application
Porous metal film filter can be used in different industries, for instance, petrochemical industry,metallurgy industry, water treatment plant, the oil industry and pharmaceutical industry for hot gas, high temperature flue gas, water, oil, chemical filtration.
About us
Guangzhou sailong additives manufacturing co., ltd is jointly sponsored by northwest institute for non-ferrous metal research, xi'an sailong metal co., ltd and state key laboratory of porous metal materials, and is a high-tech enterprise led by core members of the technical team. The company's entrepreneurial team is led by professor huiping Tang, million plan talent and director of the state key laboratory of porous metal materials, and Dr. qiangbing Wang, deputy director of the state key laboratory of porous metal materials. Professor Tang is the chairman of the company, and Dr. Wang is the general manager of the company. The company has more than 90% of the master.
The company is mainly engaged in the design, development, production and sales of porous metal filter and additive manufacturing products, including 3d printing parts, powder metallurgy products, equipment manufacturing of refining and chemical production. Products have been widely used in aerospace, medical, petrochemical ,water treatment plant, metallurgy industry and other fields.
Certification
Question
Q: Are you trading company or manufacturer?
A: We are the professional manufacturer specializes in the development of porous metal filters for more than 20 years. We will always provide the best technical service support to our clients both in and after warranty period.
Q: What materials are these products?
A: Titanium and titanium alloys, nickel and nickel alloys, stainless steel, or customized.
Q:How long is your delivery time?
A: Generally it is 4-8 days if the goods are in stock. Certainly it is 10-20 days if the goods are not in stock, it is according to quantity.
Q:Do you provide samples? is it free or extra?
A:Yes, we could offer the sample for free charge but do not pay the cost of freigh.
What is the porous metal film filter?
The metal film filter material is composed of the porous metal matrix and porous metal film. The porous metal matrix is sintered by metal powder or wire mesh and the porous metal film is a dense metal powder layer. The porous metal substrate provided product strength and porous metal film provides filtration accuracy.
Features
1. Efficient and accurate filtration: the special structure of the filter disc filtration technology, accurate and sensitive performance, to ensure that only particles smaller than the required size can enter the system, is the most effective filtration system; Specifications are 5μ, 10μ, 20μ, 55μ, 100μ, 130μ, 200μand so on. Users can choose different precision filter disks according to water requirements. System traffic can be flexibly adjusted as required.
2. Standard modular, save space: The system is based on the standard disc filter unit, according to the modular design, users can choose according to demand, flexible, strong interchangeability. The system is compact, occupies a small area, can flexibly use the corner space for installation, such as the treatment of water 300m3/h about the equipment covers an area of only about 6m2(general water quality, filtration grade 100μm).
3. Automatic operation, continuous water discharge: between the units in the filter combination, the backwashing process takes turns, automatic switch between the working and backwashing state, can ensure continuous water discharge; Backwash water consumption is very little, only accounting for 0.5% of the water output; If combined with air auxiliary backwash, the water consumption can be reduced to less than 0.2%. High-speed and thorough backwash, only tens of seconds to complete
4. Long life: the new plastic filter element is strong, no wear, no corrosion, very little scaling, after years of industrial practical verification, the use of 6 to 10 years without wear, not aging, filtering and backwashing effect will not be worse because of the use of time.
5. High quality, less maintenance: the products meet the corresponding quality standards, all products are tested and tested before leaving the factory under simulated conditions, no special tools, few parts; Easy to use, requiring only regular inspection and almost no routine maintenance.
Specifications
| Filter media | Stainless steel; Titanium and titanium alloy; Nickel and nickel alloy |
| Connector | Flat, insert type thread type, fin, or customized |
| Length | 5~1500 mm, or customized |
| Shape | Tube, piece, boat, or customized |
| Diameter | Φ5~300 mm, or customized |
| Pore size | 0.5~30 um |
| Porosity | 10%~30% |
| Permeability | 10~500m3/(m2·kpa·h) |
| Temperature resistance | <=850ºC |
| Maximum working pressure | 3 Mpa |
Application
Porous metal film filter can be used in different industries, for instance, petrochemical industry,metallurgy industry, water treatment plant, the oil industry and pharmaceutical industry for hot gas, high temperature flue gas, water, oil, chemical filtration.
About us
Guangzhou sailong additives manufacturing co., ltd is jointly sponsored by northwest institute for non-ferrous metal research, xi'an sailong metal co., ltd and state key laboratory of porous metal materials, and is a high-tech enterprise led by core members of the technical team. The company's entrepreneurial team is led by professor huiping Tang, million plan talent and director of the state key laboratory of porous metal materials, and Dr. qiangbing Wang, deputy director of the state key laboratory of porous metal materials. Professor Tang is the chairman of the company, and Dr. Wang is the general manager of the company. The company has more than 90% of the master.
The company is mainly engaged in the design, development, production and sales of porous metal filter and additive manufacturing products, including 3d printing parts, powder metallurgy products, equipment manufacturing of refining and chemical production. Products have been widely used in aerospace, medical, petrochemical ,water treatment plant, metallurgy industry and other fields.
Certification
Question
Q: Are you trading company or manufacturer?
A: We are the professional manufacturer specializes in the development of porous metal filters for more than 20 years. We will always provide the best technical service support to our clients both in and after warranty period.
Q: What materials are these products?
A: Titanium and titanium alloys, nickel and nickel alloys, stainless steel, or customized.
Q:How long is your delivery time?
A: Generally it is 4-8 days if the goods are in stock. Certainly it is 10-20 days if the goods are not in stock, it is according to quantity.
Q:Do you provide samples? is it free or extra?
A:Yes, we could offer the sample for free charge but do not pay the cost of freigh.
