 |
| Quantity: | |
|---|---|
Product of introduction
The working speed of PREP is greatly increased, the powder sphericity has reached more than 95%, and the yield of fine powder has been significantly increased. The working environment of powder milling is under Ar or He inert atmospheres. The oxygen increment of active metals such as titanium alloy is controlled within 100ppm, while the oxygen increment of metals such as high-temperature alloys can reach 50ppm.The equipment only occupies 4m×3m, greatly reducing the requirements for installation conditions. The simple and professional operation interface design enables users to operate more conveniently. Users can develop new alloy powder according to their own needs, which is especially suitable for universities, scientific research institutions and other units for the trial production of new material system powder and the development and production of small-batch, multi-variety high-quality spherical metal/alloy powder.
Product parameter
Rotation speed | 50000-60000 rpm |
Diameter of electrodes | Φ20-30 mm |
Powder morphology | spherical rate≥95% |
Particle size | D50≤43 µm （IN718） |
Oxygen increment | ≤100 ppm (titanium alloy) |
Atmosphere | Ar or He |
Rated power | ~120 kW |
Floor space | 4m´3m´2.5m |
Powder material | W, Ta, Nb, Ti, Ni, Co and refractory alloys |
Main advantages
The working speed is greatly increased, and higher yield of fine powder;
Powder sphericity reaches above 95%;
The working environment is under Ar or He inert atmosphere, especially suitable for the development of Ti, Ni, Co, stainless steel, refractory metal and other alloy powders;
The whole process of powdering is non-contact which can ensure high powder purity and lower impurity content;
Occupied area is 4m×3m with simple installation conditions;
Simple and professional interface design;
Process technology and personnel training system are perfect;
Very suitable for scientific research, experiment, development and production of high-quality spherical metal powder in universities and research institutes (especially suitable for the development of new materials).
Application
To produce nickel base superalloy powder, titanium alloy powder, stainless steel powder and refractory metal powder.
Deliver, shipping and servicing
About Us
Guangzhou sailong additive manufacturing co., ltd is jointly sponsored by northwest institute for non-ferrous metal research and state key laboratory of porous metal materials, and is a high-tech enterprise led by core members of the technical team. The company is mainly engaged in the design, development, production and sales of PREP equipment, spherical metal powder, metal 3d printing parts, porous metal materials and titanium alloy product, widely used in additive manufacturing, laser cladding, surface coating, electronic product and other fields.
Certificates
FAQ
Question
Q: Are you manufacturer?
A: We are the professional manufacturer specialized in the development of powder equipments more than 15 years. We will always provide the best technical service support to our clients both in and after warranty period.
Q: What products do you have?
A: We have two types of milling equipment, desktop-grade milling equipment and industrial-grade milling equipment.
What's the MOQ?
A: one set
Q: How long is your delivery time?
A: Generally it is 1-2 months.
Q: Which payment can be acceptable?
A: We could accept the payment by L/C, T/T, Paypal, Western Union. Etc
Q: Certificate & Quality
A: We have CE, FDA certifications. 100% QC checked before the goods being packed up. For other certificates you need, we will try our best to reach them. We aim to provide the best quality and services to all global clients.
Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q: Where is your company located? How can i visit there?
A: Our company is located in Guangzhou city, Guangdong Province,China.
We can pick you up if you need, welcome to visit our company.
Q: Can you shipping to my address? How much for shipping cost?
A: Pls send us your shipping address, then we will calculate the shipping cost for you
Product of introduction
The working speed of PREP is greatly increased, the powder sphericity has reached more than 95%, and the yield of fine powder has been significantly increased. The working environment of powder milling is under Ar or He inert atmospheres. The oxygen increment of active metals such as titanium alloy is controlled within 100ppm, while the oxygen increment of metals such as high-temperature alloys can reach 50ppm.The equipment only occupies 4m×3m, greatly reducing the requirements for installation conditions. The simple and professional operation interface design enables users to operate more conveniently. Users can develop new alloy powder according to their own needs, which is especially suitable for universities, scientific research institutions and other units for the trial production of new material system powder and the development and production of small-batch, multi-variety high-quality spherical metal/alloy powder.
Product parameter
Rotation speed | 50000-60000 rpm |
Diameter of electrodes | Φ20-30 mm |
Powder morphology | spherical rate≥95% |
Particle size | D50≤43 µm （IN718） |
Oxygen increment | ≤100 ppm (titanium alloy) |
Atmosphere | Ar or He |
Rated power | ~120 kW |
Floor space | 4m´3m´2.5m |
Powder material | W, Ta, Nb, Ti, Ni, Co and refractory alloys |
Main advantages
The working speed is greatly increased, and higher yield of fine powder;
Powder sphericity reaches above 95%;
The working environment is under Ar or He inert atmosphere, especially suitable for the development of Ti, Ni, Co, stainless steel, refractory metal and other alloy powders;
The whole process of powdering is non-contact which can ensure high powder purity and lower impurity content;
Occupied area is 4m×3m with simple installation conditions;
Simple and professional interface design;
Process technology and personnel training system are perfect;
Very suitable for scientific research, experiment, development and production of high-quality spherical metal powder in universities and research institutes (especially suitable for the development of new materials).
Application
To produce nickel base superalloy powder, titanium alloy powder, stainless steel powder and refractory metal powder.
Deliver, shipping and servicing
About Us
Guangzhou sailong additive manufacturing co., ltd is jointly sponsored by northwest institute for non-ferrous metal research and state key laboratory of porous metal materials, and is a high-tech enterprise led by core members of the technical team. The company is mainly engaged in the design, development, production and sales of PREP equipment, spherical metal powder, metal 3d printing parts, porous metal materials and titanium alloy product, widely used in additive manufacturing, laser cladding, surface coating, electronic product and other fields.
Certificates
FAQ
Question
Q: Are you manufacturer?
A: We are the professional manufacturer specialized in the development of powder equipments more than 15 years. We will always provide the best technical service support to our clients both in and after warranty period.
Q: What products do you have?
A: We have two types of milling equipment, desktop-grade milling equipment and industrial-grade milling equipment.
What's the MOQ?
A: one set
Q: How long is your delivery time?
A: Generally it is 1-2 months.
Q: Which payment can be acceptable?
A: We could accept the payment by L/C, T/T, Paypal, Western Union. Etc
Q: Certificate & Quality
A: We have CE, FDA certifications. 100% QC checked before the goods being packed up. For other certificates you need, we will try our best to reach them. We aim to provide the best quality and services to all global clients.
Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q: Where is your company located? How can i visit there?
A: Our company is located in Guangzhou city, Guangdong Province,China.
We can pick you up if you need, welcome to visit our company.
Q: Can you shipping to my address? How much for shipping cost?
A: Pls send us your shipping address, then we will calculate the shipping cost for you
