 |
| Quantity: | |
|---|---|
Product of introduction
Our company's spherical pure aluminum powder is prepared by the plasma rotary electrode atomized process (PREP), which widely used in Aerospace parts, auto parts, heat exchangers and other products.
Product parameter
Spherical pure aluminum powder | |||||||||
Aluminum | Chemical composition (wt.%) | ||||||||
Al | Si | Fe | O | \ | |||||
Tested | 99.81 | 0.06 | 0.093 | <800ppm | \ | ||||
Particle size distribution | |||||||||
Purity | 99.9% | ||||||||
Sphericity | >95% | ||||||||
Bulk density | 0.96g/cm3 | ||||||||
Tap density | 1.3g/cm3 | ||||||||
Fluidity | 10-20s/50g | ||||||||
Application | Additive manufacturing, PM, HM, Surface coating, spraying etc. | ||||||||
Other things | We also produce AgSi10Mg, AgSi7Mg, ADC12, 2014, 2024, 6061, 6063,6082,6005A, 7A04, 7055,7075,AlSiSc, etc. | ||||||||
Product feature
High purity.
High sphericity with good fluidity.
Low oxygen content.
Almost no hollow powder.
Product qualification
Equipment
About us
Guangzhou sailong additive manufacturing co., ltd is jointly sponsored by northwest institute for non-ferrous metal research and state key laboratory of porous metal materials, and is a high-tech enterprise led by core members of the technical team. The company has more than 80% of the master.
The company is mainly engaged in the design, development, production and sales of spherical metal powder, powder equipment, metal 3d printing parts, porous metal materials and titanium alloy product, widely used in additive manufacturing, laser cladding, surface coating, electronic product and other fields.
Certificates
Deliver, shipping and servicing
Latest news
On October 31, 2019, "Xiangtan University-Guangzhou Sailong Additive Manufacturing Co., Ltd. Practice Training Base" was officially established in the School of Materials Science and Engineering of Xiangtan University. The founding ceremony was presided over by Professor Tang Minghua, deputy dean of the School of Materials Science and Engineering. Dean Professor Yin Fucheng, Professor Lin Jianguo, Director of the Ministry of Science and Technology Wen Shihua and Assistant General Manager of Guangzhou Sailong Additive Manufacturing Co., Ltd. Ming Jun jointly unveiled the "Additive Manufacturing Practice Training Base".
The training base for additive manufacturing practice of Xiangtan University will take additive manufacturing as the starting point, combining the professional characteristics of material science and engineering, focusing on the internship and training of powder bed electron beam additive manufacturing technology, Expand and extend knowledge, improve students' practical and innovative ability, and cultivate more professional and technical personnel for the metal additive manufacturing industry.
FAQ
Question
Q: Are you trading company or manufacturer?
A: We are the professional manufacturer specialized in the development of spherical metal powder more than 10 years. We will always provide the best technical service support to our clients both in and after warranty period.
Q: What products do you have?
A: spherical titanium alloys, nickel, copper, tantalum, powder, nickel powder, copper powder, Tantalum powder, etc.
What's the MOQ?
A: 1kg
Q: How long is your delivery time?
A: Generally it is 5-7 days.
Q: Which payment can be acceptable?
A: We could accept the payment by L/C. T/T, Paypal, Western Union. Etc
Q: Certificate & Quality
A: CE and ISO certified for most products.
Product of introduction
Our company's spherical pure aluminum powder is prepared by the plasma rotary electrode atomized process (PREP), which widely used in Aerospace parts, auto parts, heat exchangers and other products.
Product parameter
Spherical pure aluminum powder | |||||||||
Aluminum | Chemical composition (wt.%) | ||||||||
Al | Si | Fe | O | \ | |||||
Tested | 99.81 | 0.06 | 0.093 | <800ppm | \ | ||||
Particle size distribution | |||||||||
Purity | 99.9% | ||||||||
Sphericity | >95% | ||||||||
Bulk density | 0.96g/cm3 | ||||||||
Tap density | 1.3g/cm3 | ||||||||
Fluidity | 10-20s/50g | ||||||||
Application | Additive manufacturing, PM, HM, Surface coating, spraying etc. | ||||||||
Other things | We also produce AgSi10Mg, AgSi7Mg, ADC12, 2014, 2024, 6061, 6063,6082,6005A, 7A04, 7055,7075,AlSiSc, etc. | ||||||||
Product feature
High purity.
High sphericity with good fluidity.
Low oxygen content.
Almost no hollow powder.
Product qualification
Equipment
About us
Guangzhou sailong additive manufacturing co., ltd is jointly sponsored by northwest institute for non-ferrous metal research and state key laboratory of porous metal materials, and is a high-tech enterprise led by core members of the technical team. The company has more than 80% of the master.
The company is mainly engaged in the design, development, production and sales of spherical metal powder, powder equipment, metal 3d printing parts, porous metal materials and titanium alloy product, widely used in additive manufacturing, laser cladding, surface coating, electronic product and other fields.
Certificates
Deliver, shipping and servicing
Latest news
On October 31, 2019, "Xiangtan University-Guangzhou Sailong Additive Manufacturing Co., Ltd. Practice Training Base" was officially established in the School of Materials Science and Engineering of Xiangtan University. The founding ceremony was presided over by Professor Tang Minghua, deputy dean of the School of Materials Science and Engineering. Dean Professor Yin Fucheng, Professor Lin Jianguo, Director of the Ministry of Science and Technology Wen Shihua and Assistant General Manager of Guangzhou Sailong Additive Manufacturing Co., Ltd. Ming Jun jointly unveiled the "Additive Manufacturing Practice Training Base".
The training base for additive manufacturing practice of Xiangtan University will take additive manufacturing as the starting point, combining the professional characteristics of material science and engineering, focusing on the internship and training of powder bed electron beam additive manufacturing technology, Expand and extend knowledge, improve students' practical and innovative ability, and cultivate more professional and technical personnel for the metal additive manufacturing industry.
FAQ
Question
Q: Are you trading company or manufacturer?
A: We are the professional manufacturer specialized in the development of spherical metal powder more than 10 years. We will always provide the best technical service support to our clients both in and after warranty period.
Q: What products do you have?
A: spherical titanium alloys, nickel, copper, tantalum, powder, nickel powder, copper powder, Tantalum powder, etc.
What's the MOQ?
A: 1kg
Q: How long is your delivery time?
A: Generally it is 5-7 days.
Q: Which payment can be acceptable?
A: We could accept the payment by L/C. T/T, Paypal, Western Union. Etc
Q: Certificate & Quality
A: CE and ISO certified for most products.
