 |
| Color: | |
|---|---|
| Size range: | |
| Materials: | |
| Packaging: | |
| Quantity: | |
MIM-SS-0005
7504002000
Parameters
| MIM Stainless Steel Powder | |||||||||||
| Grade | Chemical Composition (wt%) | ||||||||||
| C | Cr | Ni | Mn | Mo | Cu | Nb | S | P | Si | O | |
| 316L | ≤0.03 | 16-18 | 10-14 | ≤2 | 2-3 | - | - | ≤0.03 | ≤0.035 | ≤1 | ≤0.4 |
| 316 | ≤0.08 | 16-18 | 10-14 | ≤2 | 2-3 | - | - | ≤0.03 | ≤0.035 | ≤1 | ≤0.4 |
| 304L | ≤0.03 | 18-20 | 8-12 | ≤2 | - | - | - | ≤0.03 | ≤0.035 | ≤1 | ≤0.4 |
| 304 | ≤0.08 | 16-18 | 8-12 | ≤2 | - | - | - | ≤0.03 | ≤0.045 | ≤1 | ≤0.4 |
| 17-4PH | ≤0.07 | 15.5-17.5 | 3-5 | ≤1 | - | 3-5 | 0.15-0.45 | ≤0.03 | ≤0.040 | ≤1 | ≤0.4 |
| 420 | 0.3-0.4 | 12-14 | 0.4-0.6 | ≤1 | ≤0.75 | - | - | ≤0.03 | ≤0.040 | ≤1 | ≤0.4 |
| 440C | 0.95-1.2 | 16-18 | ≤0.6 | ≤1 | ≤0.75 | - | - | ≤0.03 | ≤0.040 | ≤1 | ≤0.4 |
| Particle Size Distribution (μm) | Tap density(g/cm3) | ||||||||||
| D90 | D50 | D10 | - | ||||||||
| GZSL-1 | ≤22.0 | 7.0-8.0 | 2.0-2.5 | 4.6 | |||||||
| GZSL-2 | 26.0 | 8.5-9.5 | 2.5-3.0 | 4.7 | |||||||
| Other Things | We can be customized according to your requirements | ||||||||||
Features
(1) Good flow performance and can be used for production of thin wall parts.
(2) High accurateness of shrinkage, can be adjusted according to customer's needs.
(3) Good Batch Stability.
Condition For Using
| Grade | MFI (g/10 min) | Injection Temperature (ºC) | Mold Temperature (ºC) | OSF | Debinding Ratio (%) | Green Density (g/cm3) | Sintered Density (g/cm3) |
| 316L | 800-1500 | 190 | 110 | 1.167 | ≥7.9 | 5.35-5.42 | 7.8 |
| 304L | 800-1500 | 5.35-5.41 | 7.8 | ||||
| 17-4PH | 800-1500 | 5.29-5.35 | 7.7 |
Physical Performance of Products
| Grade | Sintering | Yield Strength | Tensile Strength | Elongation | Hardness | Corrosion Resistance |
| 316L | ≥7.80 g/cm3 | 184 MPa | 542 MPa | 64% | 80 HRB | 72h |
| 17-4PH | ≥7.70 g/cm3 | 802 MPa | 854 MPa | 8.5% | 30 HRC | 24h |
Application
Widely used in Aerospace (turbine, nozzle, engine, etc), Nuclear & Chemical (valve, drive devices, etc)
Company Case
About us
Guangzhou sailong additives manufacturing co., ltd is jointly sponsored by northwest institute for non-ferrous metal research, xi'an sailong metal co., ltd and state key laboratory of porous metal materials, and is a high-tech enterprise led by core members of the technical team. The company's entrepreneurial team is led by professor huiping Tang, million plan talent and director of the state key laboratory of porous metal materials, and Dr. qiangbing Wang, deputy director of the state key laboratory of porous metal materials. Professor Tang is the chairman of the company, and Dr. Wang is the general manager of the company. The company has more than 90% of the master.
The company is mainly engaged in the design, development, production and sales of metal powder and additive manufacturing products, including 3d printing parts, powder metallurgy products, equipment manufacturing of refining and chemical production. Products have been widely used in aerospace, medical, petrochemical ,water treatment plant, metallurgy industry and other fields.
Certification
Question
Q: Are you trading company or manufacturer?
A: We are the professional manufacturer specializes in the development of 3D printing metal powder more than 10 years. We will always provide the best technical service support to our clients both in and after warranty period.
Q: What materials are these products?
A: Titanium alloys powder, nickel powder, copper powder, Tantalum powder, etc.
Q: How long is your delivery time?
A: Generally it is 4-8 days if the goods are in stock. Certainly it is 10-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples? is it free or extra?
A: Yes, we could offer the sample for free charge but do not pay the cost of freigh.
Parameters
| MIM Stainless Steel Powder | |||||||||||
| Grade | Chemical Composition (wt%) | ||||||||||
| C | Cr | Ni | Mn | Mo | Cu | Nb | S | P | Si | O | |
| 316L | ≤0.03 | 16-18 | 10-14 | ≤2 | 2-3 | - | - | ≤0.03 | ≤0.035 | ≤1 | ≤0.4 |
| 316 | ≤0.08 | 16-18 | 10-14 | ≤2 | 2-3 | - | - | ≤0.03 | ≤0.035 | ≤1 | ≤0.4 |
| 304L | ≤0.03 | 18-20 | 8-12 | ≤2 | - | - | - | ≤0.03 | ≤0.035 | ≤1 | ≤0.4 |
| 304 | ≤0.08 | 16-18 | 8-12 | ≤2 | - | - | - | ≤0.03 | ≤0.045 | ≤1 | ≤0.4 |
| 17-4PH | ≤0.07 | 15.5-17.5 | 3-5 | ≤1 | - | 3-5 | 0.15-0.45 | ≤0.03 | ≤0.040 | ≤1 | ≤0.4 |
| 420 | 0.3-0.4 | 12-14 | 0.4-0.6 | ≤1 | ≤0.75 | - | - | ≤0.03 | ≤0.040 | ≤1 | ≤0.4 |
| 440C | 0.95-1.2 | 16-18 | ≤0.6 | ≤1 | ≤0.75 | - | - | ≤0.03 | ≤0.040 | ≤1 | ≤0.4 |
| Particle Size Distribution (μm) | Tap density(g/cm3) | ||||||||||
| D90 | D50 | D10 | - | ||||||||
| GZSL-1 | ≤22.0 | 7.0-8.0 | 2.0-2.5 | 4.6 | |||||||
| GZSL-2 | 26.0 | 8.5-9.5 | 2.5-3.0 | 4.7 | |||||||
| Other Things | We can be customized according to your requirements | ||||||||||
Features
(1) Good flow performance and can be used for production of thin wall parts.
(2) High accurateness of shrinkage, can be adjusted according to customer's needs.
(3) Good Batch Stability.
Condition For Using
| Grade | MFI (g/10 min) | Injection Temperature (ºC) | Mold Temperature (ºC) | OSF | Debinding Ratio (%) | Green Density (g/cm3) | Sintered Density (g/cm3) |
| 316L | 800-1500 | 190 | 110 | 1.167 | ≥7.9 | 5.35-5.42 | 7.8 |
| 304L | 800-1500 | 5.35-5.41 | 7.8 | ||||
| 17-4PH | 800-1500 | 5.29-5.35 | 7.7 |
Physical Performance of Products
| Grade | Sintering | Yield Strength | Tensile Strength | Elongation | Hardness | Corrosion Resistance |
| 316L | ≥7.80 g/cm3 | 184 MPa | 542 MPa | 64% | 80 HRB | 72h |
| 17-4PH | ≥7.70 g/cm3 | 802 MPa | 854 MPa | 8.5% | 30 HRC | 24h |
Application
Widely used in Aerospace (turbine, nozzle, engine, etc), Nuclear & Chemical (valve, drive devices, etc)
Company Case
About us
Guangzhou sailong additives manufacturing co., ltd is jointly sponsored by northwest institute for non-ferrous metal research, xi'an sailong metal co., ltd and state key laboratory of porous metal materials, and is a high-tech enterprise led by core members of the technical team. The company's entrepreneurial team is led by professor huiping Tang, million plan talent and director of the state key laboratory of porous metal materials, and Dr. qiangbing Wang, deputy director of the state key laboratory of porous metal materials. Professor Tang is the chairman of the company, and Dr. Wang is the general manager of the company. The company has more than 90% of the master.
The company is mainly engaged in the design, development, production and sales of metal powder and additive manufacturing products, including 3d printing parts, powder metallurgy products, equipment manufacturing of refining and chemical production. Products have been widely used in aerospace, medical, petrochemical ,water treatment plant, metallurgy industry and other fields.
Certification
Question
Q: Are you trading company or manufacturer?
A: We are the professional manufacturer specializes in the development of 3D printing metal powder more than 10 years. We will always provide the best technical service support to our clients both in and after warranty period.
Q: What materials are these products?
A: Titanium alloys powder, nickel powder, copper powder, Tantalum powder, etc.
Q: How long is your delivery time?
A: Generally it is 4-8 days if the goods are in stock. Certainly it is 10-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples? is it free or extra?
A: Yes, we could offer the sample for free charge but do not pay the cost of freigh.
